Access Control Terminal·User Manual
29
When enabling DST, you should set the offset time, the start time, and the
end time of DST.
Press * key to cancel the date/time settings, and return to the Date
Time interface.
Press # key to confirm the date/time settings, and return to the Date
Time interface.
6.5 Permission Settings
Purpose:
On the permission settings section, you can set the weekly schedule, holiday
schedule, Holiday group and template.
Steps:
1. Move the cursor to Access Opt (Access Operation) by using direction keys.
2. Click the # key to enter the interface.
Figure 6-28 Permission Settings Interface
Weekly Schedule Settings
Steps:
1. Move the cursor to Weekly Plan by using direction keys.
2. Click the # key to enter the weekly schedule configuration interface.
To Next Page
Loading...
Need help?
General
