Access Control Terminal·User Manual
108
4. Repeat the above step to set other time periods.
Or you can select a configured day and click the Copy to Week button to
copy the same settings to the whole week.
You can click the Delete button to delete the selected time period or click
the Clear button to delete all the configured time periods.
5. (Optional) Click the Copy to button to copy the settings to other card
readers.
6. Click the Save button to save parameters.
7. Click the Apply button to take effect of the new settings.
First Card
Purpose:
The door remains open for the configured time duration after the first card
swiping.
Steps:
1. Click First Card and select an access control point.
2. Check the checkbox of Enable First Card Remain Open to enable this
function.
3. In the Remain Open Duration (min), input the time duration for remaining
open the door.
To Next Page
Loading...
