Access Control Terminal·User Manual
110
4. Check the checkbox of Enable Anti-Passing back.
5. Click Save and then click the Apply button to take effect of the new
settings.
Models DS-1T802M and DS-1T802E do not support the anti-passing back
function.
White List
Steps:
1. Click the White List button to enter into the white list interface.
2. Select the access control point, and click the Add button. Multi-door
Interlocking and select an access control point.
3. Select the access control points and click Add button.
4. Input the mobile number.
5. Select the settings of control permission, and set the property as Allow to
enable this function.
Door: The mobile can control the door (open, closed, normally open, or
normally closed).
Arming Region: The mobile can arm and disarm the arming channels
6. Click the Save button to save parameters.
7. Click the Apply button to take effect of the new settings.
To Next Page
Loading...
