Access Control Terminal·User Manual
119
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the
logs.
Please narrow the search condition if there are too many log files.
Control Logs Searching
Purpose:
The Control Log files of the Access Control System can be searched by
time ,including Access Control and Log Search.
Steps:
1. Open the Log Search page.
2. Select the radio button of Control Logs.
3. Select the Operation Type of log files.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the
logs.
Please narrow the search condition if there are too many log files.
Searching Configuration Log
Searching One-card Configuration Logs
Purpose:
The One-card Configuration Log files include departments, persons and cards
log files. One-card Configuration of the Access Control System can be operated
as adding ,modifying and deleting logs.
Steps:
1. Open the Log Search page.
2. Select the radio button of Configuration Logs.
3. Select the operation type as One-card Configuration.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the
logs.
Please narrow the search condition if there are too many log files.
Searching Access Control Configuration Logs
To Next Page
Loading...
