HIKVISION DS-K1T802 User Manual

Access Control Terminal·User Manual
10
Figure 4-4 Install the Mounting
Base
Figure 4-5 Attach the Front Cover
5. Connect the corresponded cables.
6. Align the buckle of the front cover with the slot of the mounting
base, and hang the front cover onto the mounting base. Make sure
the buckle is embedded into the slot.
7. Secure the front cover with inserting and tightening two screws on
the bottom of device.
Figure 4-6 Secure the Front Cover

HIKVISION DS-K1T802 Specifications

General

Brand	HIKVISION
Model	DS-K1T802
Category	IP Access Controllers
Language	English