Access Control Terminal·User Manual
12
Figure 5-1 SADP Interface
3. Create a password and input the password in the password field, and
confirm the password.
STRONG PASSWORD RECOMMENDED– We highly
recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of
your product. And we recommend you reset your
password regularly, especially in the high security system,
resetting the password monthly or weekly can better
protect your product.
4. Click OK to save the password.
You can check whether the activation is completed on the pop-up
window.
If activation failed, please make sure that the password meets the
requirement and then try again.
5. Change the device IP address to the same subnet with your
computer by modifying the IP address manually.
To Next Page
Loading...
Need help?
General
