Access Control Terminal·User Manual
47
4. Click button to import the selected access control
points or click to import all the available access control
points.
• You can click button on the upper-right corner of the window to
create a new group.
• The control client can manage 100 access control points at most.
Editing Access Control Point
Steps:
1. Click to select an access control point in the list and click the
button to edit the access control point.
2. Edit the Door Name and Position.
3. Click button to finish editing.
You can also enter the Edit interface by double clicking the door from the list.
Deleting Access Control Point
Several ways are supported to delete the access control point, as shown below.
Click to select a group in the group list, select door(s) under it, and click
button.
Click to select a group in the group list, and click button
to delete all access control points under the group.
Move the mouse onto a group in the group list, and click button to
delete all access control points under the group.
Uou can also edit/delete a door on the Import Access Control Point panel.
To Next Page
Loading...
