HIKVISION DS-KD8003-IME2 - Main Unit and Two-Wire Unit Terminals

Note
•
The new password and conrm password should be idencal.
•
Aer eding the password of device, click refresh buon from the
device list, the added device will not be there. You should add the device
again with new password to operate the remote conguraon.
RS-485
Click RS485 to enter the RS-485 sengs page. You can view and edit the
RS-485 parameters of the device.
Figure 1-12 RS-485 Sengs
Note
For indoor staon and master staon, there are 3 choices for the working
mode: transparent channel, disable, and custom.
1.6 Congure Video Intercom Parameters
Click Video Intercom on the remote conguraon page to enter the video intercom
parameters sengs: Device Number Conguraon, Time Parameters, Access and
Elevator Control, IO Input/Output, Volume, Dial, Sub Module and so on.
1.6.1 Device ID
Conguraon
Module Door Staon Conguraon Guide
9