HIKVISION DS-KD8003-IME2 - Intercom Protocol; Sub Module

2.
Enable Enable Moon Detecon.
3.
Congure the parameters.
4.
Click Save.
Note
The arming schedule is defaulted as all-day.
1.6.9 Intercom Protocol
Steps
1.
Click Intercom Protocol to enter the intercom protocol page.
2.
Select the protocol according to needs.
3.
Click Save.
1.6.10 Sub Module
Steps
1.
Click Sub Module to enter the sub module conguraon page.
Figure 1-22 Sub Module
2.
Oponal: Enter the Room No. for each call buon of the nametag module.
Module Door
Staon Conguraon Guide
16