HIKVISION DS-KD8003-IME2 - Ftp

Figure 1-25 Linked Device Network
2.
Enter the Master
Staon IP Adderss, (Main) Door Staon IP Address, SIP Server
IP Address, Security Control Panel IP Address and Port No.
3.
Select the main door
staon type from the drop-down list.
4.
Click Save to enbale the sengs.
Note
•
Aer adding master staon IP Address, the linkage between indoor staon
and master staon can be realized.
•
Aer adding the door staon IP Address, the video intercom between indoor
staons of same building can be realized.
•
Aer adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor staons of dierent building, calling indoor
staon from outer door staon and video intercom between management
center and indoors.
•
Aer adding management center IP Address, the events can be uploaded to
the management center.
•
For indoor extension, only parameter about the main indoor staon should
be congured.
1.7.3 FTP
Aer conguring the FTP parameters, the captured pictures of door staon will be
uploaded to the FTP server automacally.
Steps
1.
Click FTP to enter the FTP parameters sengs page.
Module Door
Staon Conguraon Guide
19