HIKVISION DS-KD8003-IME2 - Video Display; Video Parameters

Figure 1-36 Issue Card in Batch
2.
Select Normal Card as Card Type.
3.
Enter the card quanty issued for each person.
4.
Select the card reader mode and ll related informaon.
5.
Click Read/Enter.
6.
Aer issuing the card to the person, the person and card informaon will display
in the Person(s) with Card Issued list.
7.
Click OK.
1.9 Video Display
1.9.1 Video Parameters
Steps
1.
Click Video Parameters to enter the video parameters
sengs page.
Module Door
Staon Conguraon Guide
32