HIKVISION DS-KD8003-IME2 - Search Video Intercom Information

Steps
1.
In the Video Intercom page, click Call Log to enter the Call Log page.
Figure 2-3 View Call Logs
All the call logs will display on this page and you can check the log informaon,
e.g., call status, start me, resident's organizaon and name, device name and
ring or speaking duraon.
2.
Oponal: Click the call buon to re-dial the resident.
3.
Oponal: Click the cancel buon to delete the call log. Or you can click Clear to
delete all logs.
2.2.4 Search Video Intercom
Informaon
You can search the call logs between the iVMS-4200 client soware and video
intercom devices, device unlocking logs and the sent noce informaon.
In the Access Control module, click to open the Search page
Search Call Logs
Steps
1.
In the
Informaon Search page, click Call Log to enter the Call Log page.
Module Door
Staon Conguraon Guide
39