HIKVISION DS-KD8003-IME2 - Page 36

Get Person Informaon from Device
If the added device has been congured with person informaon (including person
details, ngerprint, issued card informaon), you can get the person informaon
from the device and import to the client for further operaon.
Steps
Note
This funcon is only supported by the device the connecon mothod of which is
TCP/IP when adding the device.
1.
In the organizaon list on the le, click to select an organizaon to import the
persons.
2.
Click Get Person to pop up the following dialog box.
Figure 1-35 Select Device
3.
The added access control device will be displayed.
4.
Click to select the device and then click OK to start geng the person
informaon from the device.
5.
Oponal: You can also double click the device name to start geng the person
informaon.
Module Door
Staon Conguraon Guide
28