HIKVISION DS-KD8003-IME2 - Page 38

Steps
•
For one person, you can add up to 4 access groups to one access control point of
one device.
•
You can add up to 128 access groups in total.
•
When the access group
sengs are changed, you need to apply the access
groups to the devices again to take eect. The access group changes include
changes of template, access group sengs, person's access group sengs, and
related person details (including card number, ngerprint, face picture, linkage
between card number and
ngerprint, linkage between card number and
ngerprint, card password, card eecve period, etc).
1.
Click Access Control → Access Group to enter the Access Group interface.
2.
Click Add to open the Add window.
3.
In the Name text eld, create a name for the access group as you want.
4.
Select a template for the access group.
Note
You should congure the template before access group sengs. Refer to for
details.
5.
In the le list of the Select Person eld, select person(s) and the person(s) will be
added to the selected list .
6.
In the le list of the Select Door eld, select door(s) or door staon(s) for the
selected persons to access, and the selected door(s) or door staon(s) will be
added to the selected list.
7.
Click OK.
8.
Aer adding the access groups, you need to apply them to the access control
device to take
eect.
1) Select the access group(s) to apply to the access control device.
To select mulple access groups, you can hold the Ctrl or Shi key and select
access groups.
2) Click Apply All to Devices to start applying all the selected access group(s) to
the access control device or door staon.
Module Door
Staon Conguraon Guide
30