HIKVISION DS-KD9203 Series - Page 38

Figure 7-4 TCP/IP Sengs
2.
Congure the network parameters.
-
Check DHCP, the device will get the parameters automacally.
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.
3.
Congure the corresponding DNS server parameters.
4.
Click Save to enable the
sengs.
Port
Sengs
Steps
1.
Click Network → Basic Sengs → Port to enter the sengs page.
Video Intercom Face Recognion Door Staon User Manual
27