HIKVISION DS-PHA20-W2P

The device will push nocaons when tampering alarm of the control is triggered or
restored.
Panic Alarm Nocaon
The device will push nocaons when panic alarm on keypads or keyfobs is triggered or
restored by keypads or keyfobs.
Medical Alarm Nocaon
The device will push nocaons when medical alarm on keypads is triggered.
Fire Alarm
Nocaon
The device will push nocaons when re alarm on keypads is triggered or a user presses
the re alarm key on the keypad.
Panel Management Nocaon
The device will push nocaons when the user operate the control panel.
Control Panel System Status Nocaon
The device will push nocaons when the control panel system status is changed.
Detector Status Nocaon
The device will push nocaons when any detector status is changed.
Device Status Alarm Nocaon
The device will push nocaons when any device status is changed.
Smart Alarm Event
The device will push
nocaons when alarm is triggered in network cameras.
4. Oponal: For Alarm Receiver Center, you need to select center number before sengs.
5. Oponal: If you want to send the alarm nocaons to the mobile client, you should set Mobile
Phone parameters.
Hybrid Security Control Panel User Manual
23