HIKVISION DS-PHA20-W2P

Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Enter
Conguraon → Maintenance → Diagnosis .
3. Select system, alarm, device, Wi-Fi, cloud plaorm, cellular data network, network camera and
alarm receiving center as the diagnosis module.
4. Click Diagnosis to start the
operaon.
5. View the diagnosis result in the informaon box.
Export File
You can export debugging le to the PC.
Steps
1. In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → Maintenance → Export File to enter the page.
Figure 4-33 Export File Page
3. Enable Debugging Log.
4. Click Export to save the debugging le in the PC.
Hybrid Security Control Panel User Manual
52