HIKVISION DS-PHA20-W2P

Locking User Sengs
Set user locking. You can view the locked user or unlock a user and set the user locked duraon.
Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → System → Security → Locking User Sengs to enter the Locking User
Sengs page.
3. Set the following parameters.
Max. Failure Aempts
If the user connuously input the incorrect password for more than the congured mes, the
account will be locked.
Note
The administrator has two more aempts than the congured value.
Locked Duraon
Set the locking duraon when the account is locked.
Note
The available locking duraon is 5s to 1800s.
4. Click to unlock the account or click Unlock All to unlock all locked users in the list.
5. Click Save.
Module Lock
Sengs
Set the module locking parameters, including the Max Failure Aempts, and locked duraon. The
module will be locked for the programmed me duraon, once the module authencaon has
failed for the amount of congured mes.
Steps
1. In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → System → Security → Module Lock Sengs to enter the Module Lock
Sengs page.
3. Select a module from the list, and click the icon.
4. Set the following parameters of the selected module.
Max. Failure
Aempts
If a user connuously tries to authencaon a password for more than the congured
aempts
permied, the keypad will be locked for the programmed duraon.
Locked Duraon
Hybrid Security Control Panel User Manual
59