HIKVISION DS-PHA20-W2P

Figure 4-16 NAT Sengs
3. Drag the slider to enable UPnP.
4. Oponal: Select the mapping type as Manual
5. Set the HTTP port and the service port.
6. Click Save to complete the
sengs
Set FTP to Save Video
You can congure the FTP server to save alarm video.
Steps
1. In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → Communicaon Parameters → FTP to enter the page.
Hybrid Security Control Panel User Manual
29