HIKVISION DS-PHA20-W2P

Figure 5-10 Zone Status
Click the icon on the right of the zone, or check zones and click Bypass or Bypass Restored to
control zones.
5.8 Area
Operaon
Arm, disarm or clear alarm for areas.
In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in. Click Device Status → Area
to enter the page.
Figure 5-11 Area Status
Click the icon on the right of the area, or check areas and click Stay Arm, Away Arm, Disarm or
Clear Alarm to control areas.
5.9 Sounder
Operaon
Open or close the sounder.
Hybrid Security Control Panel User Manual
97