HIKVISION DS-PHA20-W2P

In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in. Click Device Status →
Sounder to enter the page.
Figure 5-12 Sounder Status
Click the icon on the right of the sounder, or check sounders and click Open or Close to control
sounders.
5.10 Relay
Operaon
Open or close the relay.
In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in. Click Device Status → Relay
to enter the page.
Figure 5-13 Relay Status
Click the icon on the right of the relay, or check relays and click Open or Close to control relays.
Hybrid Security Control Panel User Manual
98