HIKVISION DS-PHA20-W2P

Figure 4-45 Opon Managment
Forced Arming
If the opon is enabled and there are acve faults in a zone, the zone will be bypassed
automacally.
Note
If Enable Arming is enabled, Forced Arming is only eecve for Auto Arming.
System Faults
If the opon is enabled, the device will upload the system fault report automacally.
One-Push Lock
If the opon is enabled, the installer can lock other users.
For Fault Check:
Hybrid Security Control Panel User Manual
70