HIKVISION DS-PHA20-W2P - 5.2 Disarming; 5.3 Use the Keyfob

Figure 4-51 Arming or Disarming Schedule Page
Entry Delay 1
Entry Delay 2
Set a value for Entry Delay 1 and Entry Delay2. Entry delay is a me concept. If entry delay is
congured for the delayed zone, when you enter an armed delayed zone, the zone alarm will
not be triggered unl the end of entry delay.
Note
Aer set value for Entry Delay 1 and Entry Delay 2, you should set the entry delay of a specic
zone to the value of Entry Delay 1 or Entry Delay 2.
Exit Delay
Set exit delay for the delayed zone. If exit delay is congured for the delayed zone, aer you arm
the zone on the indoor unit, you can exit the zone without triggering alarm
unl the end of exit
delay.
Auto Arm
Hybrid Security Control Panel User Manual
77