HIKVISION iDS-9664NXI-I8/16S - Configure PTZ Linkage

Steps
1. Go to the linkage acon interface of the alarm detecon (e.g., moon detecon).
2. Set Audio and Light Alarm Linkage as your desire.
3. Click Apply.
6.4.8 Congure PTZ Linkage
The system can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event, or
VCA detecon events occurs.
Before You Start
Make sure the connected PTZ or speed dome connected supports PTZ linkage.
Steps
1. Go to Linkage
Acon interface of the alarm input or VCA detecon (e.g., face detecon, line
crossing
detecon, intrusion detecon, etc.).
2. Select the PTZ Linkage.
3. Select the camera to perform the PTZ
acons.
4. Select the preset/patrol/paern No. to call when the alarm events occur.
Note
You can set only one PTZ type for the linkage acon each me.
Network Video Recorder User Manual
79