HIKVISION iDS-9664NXI-I8/16S - Sudden Scene Change Detection

Figure 6-11 Defocus Detecon
4. Check Enable.
5. Oponal: Check Save VCA Picture to save the captured defocus detecon pictures.
6. Set the
detecon sensivity.
Sensivity
Sensivity range: [1-100]. The higher the value is, the more easily the defocus image will be
detected.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.2.12 Sudden Scene Change
Detecon
Scene change detecon detects the change of the surveillance environment aected by external
factors, such as the
intenonal rotaon of the camera.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Sudden Scene Change.
Network Video Recorder User Manual
72