HIKVISION iDS-9664NXI-I8/16S - Chapter 8 IoT; 8.1 Add an IoT Device

Note
3. Set protocol parameters.
Type
The network camera
adopng custom protocol must support geng stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
geng main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
4. Click OK.
5. Click Custom Add to add cameras.
6. Set the parameters.
7. Click OK.
1.5 Connect to
Plaorm
1.5.1 Congure ISUP
SDK is based on Intelligent Security Uplink Protocol (ISUP). It provides APIs, library les, and
commands for the third-party plaorm to access devices such as NVRs, speed domes, DVRs,
network cameras, mobile NVRs, mobile devices, decoding devices, etc. With this protocol, the
third-party
plaorm can realize funcons like live view, playback, two-way audio, PTZ control, etc.
Steps
1. Go to System → Network → Advanced → Plaorm Access .
Network Video Recorder User Manual
13