HIKVISION iDS-9664NXI-I8/16S - Configure Disk Clone

Figure 15-8 Health Detecon
2. Click a HDD to view details.
15.6.4
Congure Disk Clone
Select the HDDs to clone to the eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
Steps
1. Go to Maintenance → HDD Operaon → HDD Clone .
Figure 15-9 HDD Clone
2. Check the HDD to clone. The capacity of the selected HDD must match the capacity of the clone
desnaon.
3. Click Clone.
4. Click Yes on the pop up message box to create the clone.
Network Video Recorder User Manual
173