HIKVISION iDS-9664NXI-I8/16S - Object Removal Detection

Note
Up to 4 areas are selectable.
2) Drag the sliders to set Time Threshold and Sensivity.
Time Threshold
The
me of the objects le in the region. If the value is 10, an alarm will be triggered aer
the object is le and stayed in the region for 10 s. Range: [5-20].
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
3) Click Draw Region and draw a quadrilateral in the preview window.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.2.9 Object Removal
Detecon
The object removal detecon funcon detects the objects removed from a predened region, such
as the exhibits on display, and a series of acons can be taken when the alarm is triggered.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Object Removable.
Figure 6-9 Object Removal Detecon
4. Check Enable Object Removable Detecon.
5.
Oponal: Check Save VCA Picture to save the captured object removable detecon pictures.
Network Video Recorder User Manual
69