213960EN(1) - P290 Mattress Instructions for Use Page 35
Disinfecting
Servicing
Disinfecting and Servicing
Cleaning and Disinfecting the Device
Complying with Safety Instructions
• Check that the brakes are applied on the bed on which the device is installed.
• Lock out all electrical functions.
• Disconnect the device and stow the power cord.
• Check that the connectors are securely connected to prevent water from entering
the mattress.
• Never clean the device by pouring water on it, nor with a high-pressure jet.
• Never use water at a temperature of more than 70°C.
• Avoid excessive water on the connectors.
• Refer to the recommendations of the cleaning and disinfecting of the product
provided by the manufacturer.
• Thoroughly dry the device before reusing it.
• Suitable individual protective equipment must be worn during the steps of the
cleaning operation (blouse, gloves, eye protection, etc.).
Failure to implement one or more of these recommendations may lead to damage
or deterioration, preventing use of the device and rendering the warranty void.
Controlling Infection
Insufficient Cleaning = Risk of Infection (biological danger).
All parts must be kept clean at all times in order to avoid the risk of
infection. All necessary precautions must be taken to eliminate all visible
soiling.
The following instructions are not designed to replace more appropriate cleaning
and disinfection protocols drawn up by the hygiene officer or by other bodies for
your hospital in the event of particular infectious situations.
To Next Page
Loading...
