HIMA HIMatrix F3 DIO 16/8 01 - IP Address and System ID (SRS); Type Label; Figure 6: Sample Type Label

F3 DIO 16/8 01 3 Product Description
HI 800 177 E Rev. 1.01 Page 19 of 58
3.2.1 IP Address and System ID (SRS)
A transparent label is delivered with the device to allow one to note the IP address and the
system ID (SRS for system rack slot) after a change.
IP___.___.___.___SRS____.__.__
Default value for IP address: 192.168.0.99
Default value for SRS: 60000.200.0 (SILworX)
60000.0.0 (ELOP II Factory)
The label must be affixed such that the ventilation slots in the housing are not obstructed.
Refer to the First Steps manual of the programming tool for more information on how to
modify the IP address and the system ID.
3.3 Type Label
The type plate contains the following details:
 Product name
 Bar code (1D or 2D code)
 Part no.
 Production year
 Hardware revision index (HW Rev.)
 Firmware revision index (FW Rev.)
 Operating voltage
 Mark of conformity
Figure 6: Sample Type Label