Appendix F3 DIO 16/8 01
Page 56 of 58 HI 800 177 E Rev. 1.01
Index of Tables
Table 1: HIMatrix System Variants 7
Table 2: Additional Relevant Documents 8
Table 3: Environmental Requirements 11
Table 4: Part Numbers 18
Table 5: Operating Voltage LED 21
Table 6: System LEDs 22
Table 7: Ethernet Indicators 23
Table 8: I/O LEDs 23
Table 9: Ethernet Interfaces Properties 24
Table 10: Network Ports in Use 24
Table 11: Ampacity of the Digital Outputs 25
Table 12: Product Data of F3 DIO 16/8 01 26
Table 13: Specifications for the Digital Inputs 26
Table 14: Specifications for the Digital Outputs 27
Table 15: Specifications for the Pulsed Outputs 27
Table 16: Certificates 28
Table 17: Terminal Assignment for the Digital Inputs 29
Table 18: Terminal Assignment for the Digital Outputs 30
Table 19: Configuration Variants for the Digital Outputs 31
Table 20: Terminal Assignment for the Pulsed Outputs 31
Table 21: SILworX - System Parameters for Digital Inputs, Module Tab 35
Table 22: SILworX - System Parameters for Digital Inputs, DI 16 LC: Channels Tab 35
Table 23: SILworX - System Parameters for Digital Outputs, Module Tab 37
Table 24: SILworX - System Parameters for Digital Outputs, DO 8 03: Channels tab 38
Table 25: SILworX - System Parameters for Pulsed Outputs, Module Tab 39
Table 26: SILworX - System Parameters for Pulsed Outputs, Module Tab 39
Table 27: ELOP II Factory - Digital Input System Signals 42
Table 28: ELOP II Factory - Digital Output System Signals 44
Table 29: ELOP II Factory - System Signals for the Pulsed Outputs 45
Table 30: Configuration of Line Diagnosis with Reduced Voltage with Ohmic Capacitive Loads
45
To Next Page
Loading...
