F3 DIO 16/8 01 1 Introduction
HI 800 177 E Rev. 1.01 Page 7 of 58
1 Introduction
This manual describes the technical characteristics of the device and its use. It also
includes instructions on how to install, start up and replace it.
1.1 Structure and Use of this Manual
The content of this manual is part of the hardware description of the HIMatrix
programmable electronic system.
This manual is organized in the following main chapters:
Introduction
Safety
Product Description
Start-Up
Operation
Maintenance
Decommissioning
Transport
Disposal
This manual distinguishes between the following variants of the HIMatrix system:
Programming tool Processor operating system
SILworX Versions Beyond 7
ELOP II Factory Versions Prior to 7
Table 1: HIMatrix System Variants
The manual distinguishes among the different variants using:
Separated chapters,
Tables differentiating among the versions, e.g., versions beyond 7, or prior to 7
i
Projects created with ELOP II Factory cannot be edited with SILworX, and vice versa!
i
This manual usually refers to compact controllers and remote I/Os as devices, and to the
plug-in cards of a modular controller as modules.
To Next Page
Loading...
Need help?
General
