F3 DIO 16/8 01 Appendix
HI 800 177 E Rev. 2.00 Page 57 of 60
Index of Tables
Table 1: Programming Tools for HIMatrix Remote I/Os 7
Table 2: Additional Relevant Documents 8
Table 3: Environmental Requirements 11
Table 4: Available Variants 19
Table 5: Operating Voltage LED 22
Table 6: System LEDs 22
Table 7: Ethernet Indicators 23
Table 8: I/O LEDs 23
Table 9: Ethernet Interfaces Properties 24
Table 10: Network Ports in Use 24
Table 11: Ampacity of the Digital Outputs 25
Table 12: Product Data of F3 DIO 16/8 01 26
Table 13: Specifications for the Digital Inputs 26
Table 14: Specifications for the Digital Outputs 27
Table 15: Specifications for the Pulsed Outputs 27
Table 16: Product Data of F3 DIO 16/8 014 27
Table 17: Certificates 28
Table 18: Terminal Assignment for the Digital Inputs 29
Table 19: Terminal Assignment for the Digital Outputs 30
Table 20: Configuration Variants with Digital Outputs 31
Table 21: Terminal Assignment for the Pulsed Outputs 31
Table 22: Power Supply Cable Plug Properties 32
Table 23: Input and Output Cable Plug Properties 32
Table 24: SILworX - System Parameters for Digital Inputs, Module Tab 35
Table 25: SILworX - System Parameters for Digital Inputs, DI 16 LC: Channels Tab 36
Table 26: SILworX - System Parameters for Digital Outputs, Module Tab 38
Table 27: SILworX - System Parameters for Digital Outputs, DO 8 03: Channels Tab 39
Table 28: SILworX - System Parameters for Pulsed Outputs, Module Tab 40
Table 29: SILworX - System Parameters for Pulsed Outputs, Channels Tab 40
Table 30: ELOP II Factory - Digital Input System Signals 43
Table 31: ELOP II Factory - Digital Output System Signals 44
Table 32: ELOP II Factory - System Signals for the Pulsed Outputs 45
Table 33: Configuration of Line Diagnosis for Lamp Loads and Inductive Loads 46
Table 34: Configuration of Line Diagnosis with Reduced Voltage with Ohmic, Capacitive Loads 46
To Next Page
Loading...
Need help?
General
