HIMA HIMatrix User Manual

F3 DIO 16/8 01 Table of Contents
HI 800 177 E Rev. 2.00 Page 3 of 60
Table of Contents
1
Introduction 7
1.1 Structure and Use of this Manual 7
1.2 Target Audience 8
1.3 Formatting Conventions 9
1.3.1 Safety Notes 9
1.3.2 Operating Tips 10
2 Safety 11
2.1 Intended Use 11
2.1.1 Environmental Requirements 11
2.1.2 ESD Protective Measures 11
2.2 Residual Risk 12
2.3 Safety Precautions 12
2.4 Emergency Information 12
3 Product Description 13
3.1 Safety Function 13
3.1.1 Safety-Related Digital Inputs 13
3.1.1.1 Reaction in the Event of a Fault 15
3.1.2 Line Control 15
3.1.3 Safety-Related Digital Outputs 16
3.1.3.1 Reaction in the Event of a Fault 16
3.1.4 Line Diagnosis with Digital Outputs 17
3.1.4.1 Line Diagnosis for Lamp Loads and Inductive Loads 17
3.1.4.2 Line Diagnosis for Ohmic, Capacitive Loads 18
3.1.4.3 Test Period and Monitoring Time 18
3.2 Equipment, Scope of Delivery 19
3.2.1 IP Address and System ID (SRS) 19
3.3 Type Label 20
3.4 Structure 21
3.4.1 LED Indicators 22
3.4.1.1 Operating Voltage LED 22
3.4.1.2 System LEDs 22
3.4.1.3 Communication LEDs 23
3.4.1.4 I/O LEDs 23
3.4.2 Communication 24
3.4.2.1 Connections for Ethernet Communication 24
3.4.2.2 Network Ports Used for Ethernet Communication 24
3.4.3 Pulsed Outputs 25
3.4.4 Reset Key 25
3.4.4.1 Ampacity of the Digital Outputs 25
3.5 Product Data 26
3.5.1 Product Data F3 DIO 16/8 014 27
3.6 Certified HIMatrix F3 DIO 16/8 01 28

HIMA HIMatrix Specifications

General

Brand	HIMA
Model	HIMatrix
Category	Controller
Language	English