Hioki 8420-51 - (Dial-Up Server) in Windows 98;Me

1.10 PPP (RS-232C + Modem) Settings on PC Side
99
2
3
4
5
6
7
8
9
10
11
1
1.10.11Setting Up Remote Access Servers (Dial-up
Server) in Windows 98/Me
1. From [Connections] in [My Computer] - [Dial-Up Networking],
choose [
Dial-Up Server.] (If no choices for dial-up servers are
available here, first install the dial-up server as described later.)
2. Select the modem set up in your PC and select [
Allow caller
access
] and [Change Password.]
(If no choices for changing the password are available here, first
limit shared level access as described later.)
3. Enter a password in the New password and Confirm new pass-
word areas (e.g., logger). Click [
OK.]
Leave [
Old password] blank.
(Use the same username (Connect Account) and password
(Connect Password) as the connect account and password of
the instrument used when sending FTP data.)
4. Choose [
Dial-up Server] and click the [Server Types] tab.
Old password
New password: logger
Confirm new password: logger