Hioki 8420-51 - Starting the Waveform Viewer

104
2.1 Starting the Waveform Viewer
In the Windows Start menu, select [Programs]-[HIOKI]-[Wv.] This
starts the waveform viewer application.
To close the waveform viewer application, in the [
File]-[Exit.] You
can also click the [
Close] button at the top right corner of the win-
dow.
(1) ToolBar
Click the icons in the toolbar for the respective functions.
From the left, these are: [
Open], [Save All], [Save Between Cur-
sors
], [Batch Conversion], [Properties], [Wave Control Panel],
[
Trace], [Zoom Out], [Zoom In], and [Exit.]
For details of these operations, see the descriptions of the corre-
sponding menu items.
You can also select the magnification factor for the time axis by
selecting on the toolbar.
(2) StatusBar
The status bar shows, from the left, the model name, function,
recording length, time axis, trigger time, pre-trigger and judgement
result.
(3) Version Information
To check the software version number, in the [Help] menu select
[About Wv.]
2.1 Starting the Waveform Viewer
Tool bar
Status bar