Hioki 8420-51 - FTP Data Transfer by PPP (RS-232 C + Modem)

50
1.7 Automatic Data Transfer by FTP Client
1.7.2 FTP Data Transfer by PPP (RS-232C + Modem)
1. Set the parameters for the PPP on the instrument.
❖ See Section 1.4.1 and Section 1.4.2.
2. Set parameters for communications on the instrument.
❖ See Section 1.7.2.
3. Configure the modem on the PC.
❖ See the Instruction Manual of your modem.
4. Set up the remote access server on the PC.
❖ See Section 1.10.8 to Section 1.10.13.
5. Set up the FTP server on the PC.
❖ See Section 1.7.5 to Section 1.7.6.
6. Carry out FTP automatic transmission on the instrument.
❖ See Section 1.7.3 and Section 1.7.4.
7. Set the parameters for automatic saving.
❖ Instruction Manual See Section 7.5 "Automatic Data Saving" (133 page.)
8. hen measurement is started on the instrument and a file is auto-
matically saved onto the PC card, the file is automatically trans-
mitted to the FTP server on the PC.
(In addition to public switched networks and cellular phones can be
used.)
RS-232C
9721 RS-232C CABLE (straight)
+
Memory
+Straight cable included with modem
PC
Modem
Modem
Public switched
USB, RS-232C,
or PC card
HiLogger
network modem
FTP serve
r