36
1.5 Remote Measurement Using HTTP Server
1.5.3 Main Page
To display the main page, launch Internet Explorer and enter the
instrument address in the address column as http://192.168.1.2.
Click [
SETTING PAGE.]
(When connected in PPP via a modem, the address will be like
http://192.168.55.2.) When FTP/HTTP authentication on the instru-
ment communication interface screen is turned on, you will be
prompted for the user name and password. Enter both, then press
the [
SET] button.
(To ensure that HTTP will not be inadvertently accessed by any
third party, we recommend limiting connections by user name and
password on the instrument communication interface screen.)
During measurement with the 9334 LOGGER COMMUNICATOR
or using a program created in Visual Basic, for example, remote
operation by a HTTP server is not possible.
• If the HTTP screen does not appear, choose [Tools] > [Internet
Options
] on the Internet Explorer tool bar and click on the
[
Advanced] tab. Check the box for [Use HTTP1.1] and remove
the check from the box for [
Use HTTP1.1 through proxy con-
nections
.] if it is checked. Also, choose the [Connections] tab
of [
Internet Options], click on the [LAN Settings] button, and
remove the check from the box for [
Use a proxy server] if it is
checked.
• If the HTTP screen appears but the remote control screen
does not, choose [
Tools] > [Internet Options] on the Internet
Explorer tool bar and click on the [
Security] tab. Choose [Inter-
net
] and click on the [Customize Level] button. Scroll down to
[
Java permissions] and choose a permission level to enable
Java. If Java is not installed, reinstall Internet Explorer with
Java included.
• If all of the HTTP screen does not appear, see the 1.3.4 "Com-
munication Problems" (page 18.)
• Internet Explorer version 4 or later is supported.
Netscape Navigator can also be used, but in such case, part of
the browser screen may be unable to operate normally.
To Next Page
Loading...
