Hioki 8420-51 - FTP Data Transfer by 10 BASE-T LAN

48
1.7 Automatic Data Transfer by FTP Client
1.7.1 FTP Data Transfer by 10BASE-T LAN
1. Set parameters for the LAN on the instrument and on the PC.
❖ See Section 1.3.1 to Section 1.3.5.
2. Set parameters for communications on the instrument.
❖ See Section 1.7.1.
3. Operate the FTP server on the PC.
❖ See Section 1.7.5 to Section 1.7.6.
4. Carry out FTP automatic transmission on the instrument.
❖ See Section 1.7.3 to Section 1.7.4.
5. Set the parameters for automatic saving.
❖ Instruction Manual See Section 7.5 "Automatic Data Saving" (133 page.)
6. When measurement is started on the instrument and a file is
automatically saved onto the PC card, the file is automatically
transmitted to the FTP server on the PC.
Memory HiLogger
FTP server PC
(e.g., 192.168.1.2)
(e.g., 192.168.1.1)