86
1.10 PPP (RS-232C + Modem) Settings on PC Side
1.10.5 Creating a Dial-up Connection (Dialing) in
Windows2000
1. Go to [Control Panel]-[Network and Dial-up Connections] and
choose the connection you have just created.
2. Enter the user name (e.g., logger), password (e.g., logger), and
telephone number. Then select the connection to make a dial-up
connection.
(Same as receiving user name (Receipt Account) and password
(Receipt Password) on this instrument side when using HTTP or
FTP servers and the 9334 LOGGER COMMUNICATOR.)
To Next Page
Loading...
