Hioki 8420-51 - LAN Settings

10
1.3 10BASE-T LAN Communications
1.3.2 LAN Settings
LAN settings are made on the instrument.
Display the Status Screen.
Move the blinking cursor to the position shown.
Display the Copy&Comm Screen.
Display the Comm Window.
Move the blinking cursor to the position shown.
Select "10BASE-T" for the Communications Interface.
Select each settings.
Switching Between the Five Setting Screens
Press the button or move the blinking cursor to "
< back"
or "
more >" position, then press the / button to go to
another screen.