Hioki 8420-51 - PPP (RS-232 C + Modem) Settings

1.4 PPP (RS-232C + Modem) Communications
27
2
3
4
5
6
7
8
9
10
11
1
1.4.2 PPP (RS-232C + Modem) Settings
PPP communication settings are made on the instrument.
Display the Status Screen.
Move the blinking cursor to the position shown.
Display the Copy&Comm Screen.
Display the Comm Window.
Move the blinking cursor to the position shown.
Select "PPP" for the Communications Interface.
Select each settings.
Switching Between the Five Setting Screens
Press the button or move the blinking cursor to "
< back"
or "
more >" position, then press the / button to go to
another screen.