Hioki 8420-51 - Data Acquisition Using FTP (DATA GET by FTP)

1.5 Remote Measurement Using HTTP Server
41
2
3
4
5
6
7
8
9
10
11
1
1.5.8 Data Acquisition Using FTP (DATA GET BY FTP)
• The measured data captured on the PC card file or in internal
memory of this instrument can be acquired from a WWW
browser by using FTP.
• While conducting measurement, you cannot acquire the mea-
sured data from internal memory. Wait until measurement stops
before acquiring the measured data.
• For details, see 1.6 "Downloading Data to a PC via FTP Server"
(page 43.).
When FTP/HTTP authentication on the instrument communication
interface screen is turned on, you will be prompted for the user
name and password. Enter both, then press the [
SET] button.
(To ensure that files will not be inadvertently deleted by any third
party, we recommend limiting connections by user name and pass-
word on the instrument communication interface screen.)