Hioki 8420-51 - RS-232 C Communications

1.2 RS-232C Communications
5
2
3
4
5
6
7
8
9
10
11
1
When creating a program for measurement using Visual Basic or
other programming language, see the Interface Manual on the
Application Disk (CD-R).
1.2 RS-232C Communications
• The RS-232C interface is not isolated from the instrument chas-
sis.
• Be aware that logic inputs and the RS-232C interface share
common ground.
❖ See the Instruction Manual See Section 12.1 "Connecting the 8993 DIGI-
TAL I/O UNIT" (198 page.)
• The 9612 RS-232C CABLE and the instrument connectors
should be mated carefully. Forcing the connectors together can
damage the contacts.