90
1.10 PPP (RS-232C + Modem) Settings on PC Side
1.10.8 Calling from the Instrument to PC
The following functions can be used when making calls from this
instrument to PCs using PPP (RS-232C + modem) via public
switched networks or cellular phones.
• Mail transfer by e-mail
❖ For settings on the instrument side:
See Section 1.8 "Sending Mail" (64 page.)
• Automatic data transfer by FTP client
❖ For settings on the instrument side:
See Section 1.7 "Automatic Data Transfer by FTP Client" (47 page.)
The IP address normally assigned when originating a call is
192.168.55.2 for this instrument, and 192.168.55.1 for the PC,
although the address may vary depending on settings made on the
PC side.
"Current IP Address" indicates the IP address actually assigned to
this instrument.
When dialing a number from this instrument to the PC, the remote
access server (dial-up server) must be up and running before the
call can be terminated on the PC side. The remote access server is
included with Windows, so refer to Windows HELP.
For PPP in this instrument, unsigned PAP is used for authentica-
tion.
To Next Page
Loading...
