Hioki 8420-51 - Sending Mail Via PPP (RS-232 C + Modem)

66
1.8 Sending Mail
1.8.2 Sending Mail via PPP (RS-232C + Modem)
1. Set the parameters for the PPP on the instrument.
❖ See Section 1.4.1 and Section 1.4.2.
2. Set parameters for communications on the instrument.
❖ See Section 1.8.2.
3. Carry out email transmission via the instrument.
❖ See Section 1.8.3 to Section 1.8.5.
4. When measurement is underway on the instrument and a trigger
or alarm is activated, an email is sent via email server.
(In addition to public switched networks and cellular phones can be
used.)
RS-232C
9721 RS-232C CABLE (straight)
+
+Straight cable included with modem
Modem
Memory
HiLogger
Public switched
network modem
Mail-receiv-
ing cellula
r
phone or PC
Internet service
provider
SMTP mail