Hioki 8420-51 - HTTP Communication Via PPP (RS-232 C + Modem)

34
1.5 Remote Measurement Using HTTP Server
1.5.2 HTTP Communication via PPP (RS-232C +
Modem)
1. Set parameters for the PPP on the instrument and on the PC.
❖ See Section 1.4.1 and Section 1.4.2.
2. Set parameters for communications on the instrument.
❖ See Section 1.5.2.
3. Configure the modem on the PC.
❖ See the Instruction Manual of your modem.
4. Set dialup information on the PC.
❖ See Section 1.10.1 to Section 1.10.7.
5. Operate the HTTP server on the PC.
❖ See Section 1.5.3 to Section 1.5.9.
(In addition to public switched networks and cellular phones can be
used.)
RS-232C
9721 RS-232C CABLE (straight)
+
Memory
+Straight cable included with modem
PC
Modem
Modem
Public switched
USB, RS-232C,
or PC card
HiLogger
network modem