Hioki 8420-51 - Batch Conversion to CSV Files

2.5 Batch Conversion to CSV Files
113
1
3
4
5
6
7
8
9
10
11
2
You can convert multiple waveform files CSV files.
1. Select [
File]-[Batch Conversion.]
2. Select the desired files from the file list. To select two or more
files, left-click on the desired files while holding down the Shift or
Control key.
3. If required, specify the sampling intervals in the [ThinOut] box at
which data is to be converted. Remember that not all data needs
to be converted. This setting is useful when you need data over
a broad time span.
4. In the [
Output Folder], specify the folder in which to save the
CSV files converted from waveform files. You can specify the
desired folder without typing simply by clicking on the
[
<<Browse...] button and selecting the desired folder from the
list.
5. To save in text formats other than CSV (space delimited or tab
delimited), select the desired format from the [
Output Format]
list.
6. Select [Time Notation] from among [
Sec], [Date], [Trig], and
[
Point.]
7. Click the [
Convert] button. All selected waveform files are con-
verted to CSV files and saved in the specified folder.
2.5 Batch Conversion to CSV Files