1.7 Automatic Data Transfer by FTP Client
49
2
3
4
5
6
7
8
9
11
1
Example of How to Set Automatic Data Transfer by
FTP Client
(When sending data to FTP server 192.168.1.1)
FTP Auto Transfer ON
FTP Server
IP Address 192.168.1.1 (Set the PC on which the
FTP server operates.)
User Name logger (User name of this instrument reg-
istered in FTP server on PC side.)
Password logger (Password of this instrument regis-
tered in FTP server on PC side.)
Append Identifier to File Name
Host Name Attach host name to file name to be sent.
(Set on Communication Interface screen
1/5)
IP Address Attach IP address to file name to be sent.
(Set on Communication Interface screen
1/5)
Date Attach send start time to file name to be
sent.
For example, when using host name = LOGGER, IP address =
192.168.1.2, time = '02-03-04 05:06:07, and automatically saved
file name = AUTO0001.MEM, the host name, IP address, and time
are all selected, then the file name is LOGGER_192-168-1-
2_020304-050607_AUTO0001.MEM. When using multiple instru-
ments, this helps to identify a specific instrument.
Comm Window (10BASE-T 4/5, 1/5)
To Next Page
Loading...
