108
2.3 Using the Waveform Viewer
(3) Changing Waveform Scale and Position (Waveform Control Panel)
You can adjust the display for each channel separately.
Select [
View]-[Waveform Control Panel] to display a dialog box.
CH
This indicate the list of channel.
When a check mark is present the correspond-
ing channel is displayed.
Zoom
Set the magnification on the voltage axis for the
specified channel.
Posn
Set the position of the specified channel.
Show
Display the specified channel(s).
Hide
Do not display the specified channel(s).
Show All
Display all channels.
Hide All
Do not display all channels.
Color >>
Change the color of the specified channel(s).
Default
Set all values of the specified channel(s) back
to their default values.
Close
Close the Waveform Control Panel.
To Next Page
Loading...
